Dust Collector Controller
April 2008
 Print this page

A new FDC controller provides user-friendly and reliable pulse cleaning control for all types of cartridge and baghouse dust-collection systems. Using factory-programmed or customer-selected settings, the unit monitors pressure differential across the filters to ensure more-efficient pulse cleaning, reducing compressed-air energy usage, and extending filter life. The controller is easily operated due to clear, permanent instructions posted on the NEMA 4X water- and chemicalproof box. A pulse cleaning switch on the front of the box allows the user to turn pulsing off, to pulse continuously based on predetermined settings, or to clean “on demand” when the high-pressure setting is reached and a dirty-filter alarm sounds. The user can program the controller settings using a simple five-step intuitive procedure that is self-taught in less than a minute. The control board inside the unit includes 10 solenoid outputs to interface with the dust-collection system, plus an additional 10 outputs on a lower expander board. Power requirements are 110/220 V, 50/60 Hz, single-phase. The FDC controller is UL listed. Farr APC, www.farrapc.com/fdc


Canon Communications LLC . © 2008