Hardware
March 2006
 Print this page

Self-clinching cable tie-mounts and hooks from the company are said to provide permanent attachment points for mounting wires and cables to electronic chassis or enclosures.
All PEM TY-D® hardware is said to install quickly and permanently without screws or adhesives. Hardware available includes type TD™ cable tie-mounts and patented type TDO™ hooks. Both items are RoHS-compliant and offered in several sizes for installation in metal sheets as thin as 0.040 inch/1.02 mm and as thick as 0.125 inch/3.18 mm. The tie-mounts allow users to slide ties easily through the hardware’s “eye” for fast cable mounting. Hooks enable users to attach, remove and return tie-bundled wires at mounting points when components need to be accessed for service or when wires or cables must be replaced. The hook feature allows ties to remain intact and wires to remain wrapped. The hardware is said to remain secure at designed locations and angles and panels on the side opposite of installation remain flush and without any openings to minimize EMI/RFI and potential contamination of electronics by dust or dirt. PennEngineering

0


Canon Communications LLC . © 2008