Hansen Corporation
May 2004
 Print this page

D.C. Gear Motor
Booth No. 244


The company’s line of d.c. gear motors features a permanent magnet d.c. motor mounted to a standard Synchron gear train. The motors are available in more than 360 gear ratios, 800 output shaft designs, and five mounting configurations. The standard Synchron gear train is rated up to 30 oz/in (212 mN/m) and used in ratios less than 300:1. The company’s one-way and two-way slip clutches can be used in many ratios for additional gear protection. For higher ratios and torque requirements, its heavy-duty gear train rated at 98 oz/in (692 mN/m) is available on request. The permanent magnet d.c. motor is available in voltages ranging from 6-48 V and features permanently lubricated sintered bearing. Motor life is dependent on speed, torque requirements, duty cycle, and start-stop cycles. The company’s complete product line includes stepper, d.c., clock movements, and synchronous motors.

For more information, contact Vicki Chandler, Hansen Corporation. Tel: +812/385-1463; e-mail: vchandler@hansen-motor.com.

Hansen Corporation


Canon Communications LLC . © 2008