May 2004
 Print this page

Premix Blower
Booth No. 266

Fasco announces the introduction of a pre-mix blower for commercial gas appliances. Common applications for this blower are boilers and water heaters. The blower will provide an air gas mixture for input rates up to 2,000,000 BTU/hr. Constant mass flow and a full range modulation are possible on this blower assembly. This blower is the second in the Fasco pre-mix line of blowers to be released.

The design of the blower assembly is the result of customer input and the strong blower design knowledge of the Fasco engineering team. The Fasco motor utilizes a.c. variable-speed technology. The variable-speed motor and blower design provides the required airflows at a low sound level, and the resulting blower efficiency is very good.

This blower assembly is designed so that common venturi and gas valve assemblies will attach to the inlet air portion of the blower. The Fasco variable-speed motor and speed controller will provide a stable 5 to 1 turn-down ratio. Additional turn-down ratios are possible.

The blower and motor is manufactured and assembled in the U.S.A. at the Cassville and Eldon, MO manufacturing plants.


Canon Communications LLC . © 2008