Global Supplier Directory
Supplier Solutions
Whitepaper Library
Calendar of Events
Association Locator
Contents Pages
Market Research
Subscription Center

Daily News

ASHRAE Publishes 2013 IAQ Standard
Nov 12, 2013
 Printable format
 Email this Article

The 2013 version of ASHRAE's indoor air quality standard was published with several revisions to help users better meet its requirements.

ANSI/ASHRAE Standard 62.1-2013, Ventilation for Acceptable Indoor Air Quality, sets minimum ventilation rates and other requirements for commercial and institutional buildings.

The 2013 standard combines the 2010 standard and 10 published addenda to that edition. Specific information on the contents of each addendum and approval dates for each addendum are included in Informative Appendix J at the end of the standard.

"The 2013 version of Standard 62.1 continues the trend of increasing clarity while adding flexibility," said Roger Hedrick, Standard 62.1 committee chair. "These changes will allow designers and building operators to meet the requirements of the standard and provide adequate ventilation airflow to occupants while reducing excess ventilation and the associated energy consumption."

The 2013 edition includes a number of changes that remove inconsistencies within the standard and improve clarity.

Significant changes include:

* Table 6-2, Zone Air Distribution Effectiveness is modified to increase the ventilation effectiveness of underfloor air distribution systems that meet certain conditions.
* Requirements for the quality of water used in humidification systems are modified and clarified.
* Building level pressurization requirements were clarified, including adding a definition of "exfiltration."
* A performance alternative to the prescriptive exhaust rates is added. This approach differs from the Indoor Air Quality Procedure, the existing performance-based method for setting supply ventilation rates, in that monitoring of the concentrations of contaminants of concern is required and provides the basis for control of exhaust flow rates.
* Some changes to the ventilation rates and space types in Table 6-1 are made. These add refrigerated warehouses and change the ventilation rate for sports related spaces to include a per occupant component which then allows the use of demand controlled ventilation in these spaces.
* The filtration requirement on air entering wetted cooling coils has been modified to change the MERV rating from 6 to 8. This change will reduce potential for particulate deposition on the coils that could lead to biological or other contamination on the coils.
* Toilet exhaust air that is cleaned to Class 1 may be recirculated.

The new standard can be purchased from ASHRAE at:

Back to Daily News


Daily News


Jul 17, 2014: New Wireless Networking Protocol Developed for Home Devices

Jul 17, 2014: Automated Material Handling Segment Showed 25% Sales Growth in 2013

Jul 16, 2014: Low–Voltage Variable Frequency Drives Market Poised for 2014 Growth

Jul 13, 2014: North American PCB Orders Flat in June

Jul 11, 2014: Are Appliance Retail Sales Recovering in Japan?

More Daily News>>

RSS Feeds
Appliance Industry
Market Research


March 2014: Market Research - 62nd Annual U.S. Appliance Industry Forecast
February 2014: Appliance Magazine Market Insight: December 2013
January 2014: Market Research - Appliance Historical Statistical Review: 1954-2012
January 2014: Appliance Magazine Market Insight: November 2013

Contact Us | About Us | Subscriptions | Advertising | Home
UBM Canon © 2014  

Please visit these other UBM Canon sites

UBM Canon Corporate | Design News | Test & Measurement World | Packaging Digest | EDN | Qmed | Plastics Today | Powder Bulk Solids | Canon Trade Shows