Home
Global Supplier Directory
APPLIANCE Engineer
Supplier Solutions
APPLIANCE Line
Whitepaper Library
Calendar of Events
Association Locator
Contents Pages
Market Research
Subscription Center


 
   
issue: November 2004 APPLIANCE European Edition

Switches and Switching Devices
Pushing Appliance Industry Buttons


 Printable format
 Email this Article
 Search

by David Simpson, Contributing Editor

Switch and switching device suppliers lend their expertise to appliance producers in an effort to meet needs for appropriate, timely, and cost-effective solutions.

Quantum, a Southampton, UK-based semiconductor firm, produces capacitive sensor ICs based on its patented QProx Charge-Transfer Sensing technology. The company reports that its solutions allow clients to create stylish and robust touch controls. Pictured is a board that was designed for a Korean appliance OEM contracting to a U.S. company. The board is curved, which is said to be a difficult task with membrane technology.

Appuyons sur le bouton du secteur des appareillages

Comment un fabricant d’appareils parvient-il à trouver la meilleure solution en termes d’interrupteur ? Les technologies numériques, tactiles, piézoélectriques, les détecteurs, les DEL et les membranes offrent de nouvelles approches qui peuvent aider les fabricants à satisfaire la demande de solutions appropriées, opportunes et rentables en ce qui concerne les interrupteurs et leur fabrication. Les résultats: une plus grande précision en termes de contrôle de température, une esthétique plus raffinée, une plus grande facilité d’utilisation et un meilleur niveau de sécurité qui satisfait le client et qui résout les difficultés de fabrication.

Haushaltsgeräteindustrie zieht alle Register

Wie findet ein Hersteller von Haushaltsgeräten die optimale Schaltlösung? Digitalschalter, Membranschalter, Berührungsfelder, Sensoren, LED und Piezotechnologien bieten vielfältige Möglichkeiten, die den Herstellern dabei helfen, die Nachfrage nach geeigneten, rasch verfügbaren und kostenwirksamen Lösungen beim Design von Schaltern und Schaltgeräten zu decken. Das Ergebnis sind eine genauere Temperaturregelung, ausgefallene Ästhetik, einfache Bedienung und mehr Sicherheit, wodurch nicht nur eine höhere Kundenzufriedenheit gewährleistet ist, sondern auch viele Schwierigkeiten bei der Herstellung überwunden werden.

Panoramica sugli interruttori dell’industria degli elettrodomestici

Come fa un produttore di elettrodomestici a trovare la soluzione ottimale per gli interruttori? Le tecnologie digitali, a membrana, a sfioramento, a sensore, a LED e piezo propongono nuovi approcci che possono aiutare i produttori a soddisfare la domanda di soluzioni ergonomiche ed economiche nella progettazione di interruttori e sistemi di accensione. I risultati—più accuratezza nel controllo della temperatura, soluzioni estetiche sofisticate, facilità d’uso e livelli di sicurezza superiori—garantiscono la soddisfazione dei clienti e risolvono tutti i grattacapi delle aziende.

For ultra-small space requirements, Selco Products (Anaheim, CA, U.S.) has introduced the LSMC Micro Series of temperature probes. Applications include specialized needs of the medical industry. The thermistors, just 0.0185-in diam (LSMC 400 Series) can fit into a thin hypodermic needle, demonstrating the versatility allowed through miniaturized design.

Achieving the Optimum

Tried and true switch and switching technology continues to have a place in the appliance industry. After all, products such as thermostats and standard push-button switches have long proved themselves to be reliable and low cost, and they are readily available. At the same time, though, appliance engineering needs change.

One area of change is the increasing use of digital technology in appliances. Yas Sasao, director of the Alps Electric (USA), Inc. business unit in San Jose, CA, U.S. observes that the adoption rate of digital technology varies from region to region, with Asia and Europe farther along than the U.S. He notes that about 80 percent of washers in Japan use microprocessors and membrane switches.

In ovens and ranges, he points out, digital controls provide more accurate temperatures. “But the U.S. consumer is not so concerned with this,” Mr. Sasao says. “They are more price sensitive and not as impressed with digital advantages as, for instance, are European consumers. Some appliance companies may consider presenting traditional controls on the outside, but incorporating digital on the inside.”

Overall, many suppliers are seeing a mix of requirements from customers. “On user interfaces, appliance companies demand everything from the traditional switches with tactile feel to solid-state switching applications,” observes Doug Williams, business unit manager at Marquardt Switches, Inc. (Cazenovia, NY, U.S.). “They have the flexibility to select not only what solves their switch needs, but also what addresses the look and feel they want to achieve. Internal switch systems incorporate more sensors and integration as appliance companies work to optimize performance while minimizing costs.”

How does an appliance company achieve the optimum switch solution? “We have been able to provide savings to customers by being involved in the process early, while at the same time, providing unique solutions to meeting aesthetic requirements,” says Al Hollenbeck, technical director, Poly-Flex Circuits (Cranston, RI, U.S.). “But many times customers provide us with completed drawings, where it is too late to integrate new ideas or make modest changes to improve design-for-manufacturing, therefore, lowering the cost.”

While customization may be the ideal way to optimize a switch, this is not always a practical avenue for smaller manufacturers. “These [manufacturers] have historically been forced to use standard products or pay huge R&D costs for custom products,” says Mr. Williams of Marquardt. “Being a local supplier to companies on a global basis means we can utilize local design resources to develop a solution and then tap into our global manufacturing base to manufacture their products at a competitive cost. We have embraced design and manufacturing principles like JIT and One Piece Flow that allow for customization on a smaller scale.”

In some cases, arriving at the optimum switch solution means going beyond the switch itself and offering value-added services, such as switch assemblies. For instance, Toneluck Micro (Hong Kong, China) reports that it previously sold a microswitch to a water heater manufacturer in Europe. The appliance producer then assembled the microswitch into a complete pressure switch. Today, Toneluck makes the microswitch, builds the complete pressure switch, and calibrates it according to the appliance producer’s specifications. This approach reportedly brings the total cost down 30 percent by integrating all of these assembly processes.

Another application was a project with GE Consumer & Industrial (Louisville, KY, U.S.). Initially, Toneluck Micro provided just the microswitch for one of the control modules used in a washing product. However, the supplier also had capabilities in tooling and plastic parts. After assessing these capabilities, GE decided it wanted the supplier to build the whole module with the microswitch assembled rather than supplying the switch alone to a sub-contractor for assembly. The sub-contractor had to buy other plastic parts from another injection house. Toneluck Micro’s tool engineers worked closely with GE’s design and manufacturing experts, and the result reportedly gave better value and savings since fewer parties were involved.

Increasing Safety Standards

A high level of customer safety continues to be a goal in switches. “In years past, the major emphasis of manufacturers was to provide products to consumers that would be considered safe if the various types of protection devices incorporated into an application would function if the end application was in a fault condition,” says Brandon L. Wehl, president and CEO of Portage Electric Products Inc. (North Canton, OH, U.S.). “Basically, you were more interested in keeping the entire application from causing other problems for the consumer rather than protecting the consumer from themselves. Today, dual-function protection devices are now being used in many applications to not only protect the application in a fault or misuse situation, but they also protect consumers, who believe they can fix whatever is wrong.”

One such device is a self-hold thermal control. These incorporate some type of resistive heat source along with the functionality of a thermal-control-switching device to provide an extra level of consumer protection. With Portage’s Model J(S) Series, should the device function due to a fault condition or misuse by the end user, then the thermal control portion of the switching device effectively opens the electrical circuit, turning off the power to the application. The resistive heat source is energized, creating enough heat to prevent the thermal control portion of the switching device from automatically closing and turning the power on to the application. The only way to reset the device is to interrupt the power from the source or pull the plug from the electrical outlet. Once the power has been interrupted, the resistive heat source no longer provides heat and permits the entire device to cool prior to resetting.

“This type of dual-function device is especially good for food blenders and food processors,” Mr. Wehl says. “By adding a second level of protection, you now are able to protect the consumer, who might try to rectify the problem while the main power switch is still on or the device is plugged into an electrical outlet.”

One interesting development informs consumers that a particular safety device is included in their appliances. This is taking place in kettles that include control systems provided by Strix Ltd. (Ronaldsway, Isle of Man, UK). Packaging for kettles from Birmingham-based Team International carry a hologram label in a prominent position. The hologram indicates that a Strix control system, which complies with British and international safety standards, is included. The hologram is reportedly very difficult to duplicate and distribution of the label is controlled by the switch company so only authorized manufacturers can use them. The label is said to be a response to counterfeit or illegal controls.

Many switch manufacturers strive to meet not just regional, but worldwide test requirement. As an example, Amr Khalil, product specialist at Aromat Corporation (New Providence, NJ, U.S.) says that there has been a push for U.S. companies to meet European test requirements such as VDE and TUV ratings. His company and parent company Matsushita Electric Works have invested a significant amount of effort to meet these standards. Now, all switches provided by Matsushita Electric Works and its subsidiaries are certified to worldwide standards, including UL, CSA, VDE, TUV, and SEMKO.

One potentially useful standards development is that UL and VDE have agreed to adopt a harmonized standard for switches, and UL has established clear phase-outs for existing UL 1054 standards, about 10 years in the future. Steve Hugener, marketing manager at Cherry Electrical Products (Pleasant Prarie, WA, U.S.) observes: “Over the years, the differences in UL and VDE standards have contributed to some divergence of Cherry’s product lines, with certain switches ideal for U.S. applications and other switches ideal for European applications. The upcoming harmonization should enable us to converge these products and offer more globally standardized switches.”

Also on the standards front, there is a new version of a regulation, valid in Europe, which describes safety requirements for appliances and their components. “Under this regulation, called EN 60335-1, the appliance industry will be confronted with much sharper regulations concerning flammability of switches, tested by a glow-wire test,” observes Anton Hartmann, sales manager of Switches & Controls for Cherry GmbH (Auerbach/Opf, Germany). “Our D4 series does have a recently introduced material that already fulfills the new rules that become effective in 2008. Designing in switches that meet the standards now helps our customers prevent headaches in the future.”

Touch Solutions

In touch-panel applications, Marty Hedrich, president and CEO of Monopanel Technologies, Inc. (West Allis, WI, U.S.) reports that the requirements for tactile feel continue. This, he says, is achieved through the use of metal domes or other means of achieving a firm response to switch closure. This would include the use of discrete switches underneath an overlay.

“The improvements in performance, size, and price make it more attractive to embed LEDs in flex membrane switches and achieve the economics and features of both tactile and visual feedback of switch closure,” Mr. Hedrich says. For harsh environments, his company’s Endura product line uses a patented membrane switch that can be operated through .031 thick aluminum and up to .060 thick polycarbonate. It is specified for such products as commercial washers and dryers, scales, gas dispensing equipment, and other applications with harsh and abusive environments.

One alternative to membrane and mechanical keypad offerings uses piezo technology. Barantec, Inc. (Clifton, NJ, U.S.), a subsidiary of the Baran Group, reports that its patented technology is rugged, with no moving parts to ensure a zero-failure rate. The switch is behind a metal layer. The piezo switch measures force—the actual deflection of the metal. It is not a capacitive switch, which senses a finger on the metal.

One principle behind the Baran piezo technology is the assembly of all the necessary components into a single unit (the module), thus eliminating the need for handling every component for each push point manufactured. “Understand that the module is the technology behind all of our products,” says Ayal Vogel, president of Barantec. “This makes it very universal and gives the industrial designers the ability to make sexy products without sacrificing any durability. In addition, our switches are non-mechanical and do not require any power. With these switches, the appliance industry benefits from easy cleaning, lower service costs, and reduced maintenance.”

Switches and Sensing

Sensors are playing a larger role in appliance switching. Energy efficiency, water conservation, and system performance are driving the increased need to provide feedback for advanced control algorithms, says Mr. Williams of Marquardt Switches. “We have expanded our technology base to include sensor solutions to provide flow, turbidity, pressure, vibration, and other key measurement input,” he notes.

One development for vacuum cleaners is an Automatic Speed Adjuster (ASA) from Kurz U.S.A. L.L.C. (Sarasota, FL, U.S.). This monitors suction power based on the type of surface being cleaned. There is less power when vacuuming carpets and more power when vacuuming hard floors, enabling users to clean deeply embedded dirt. “The ASA consists of a pressure switch mounted on an electronic control,” explains Heinz Kutschera, president of Kurz. “It’s being used by such companies as Miele, Electrolux, and BSH Bosch und Siemens Hausgeräte.”

Whether it is new technologies like these or tried-and-true solutions, look to your suppliers to show you how to push the right switch buttons for your appliances.

 

Daily News

...........................................................

Dec 22, 2014: DOE's Building Technologies Office releases Roadmap for Emerging HVAC Technologies

Dec 19, 2014: Whirlpool Corp. provides guidance for 2015

Dec 19, 2014: Panasonic to showcase built-in appliances at LivingKitchen 2015

Dec 19, 2014: New residential construction in November 2014

Dec 19, 2014: 2014 U.S. steel production up 0.7% from 2013

More Daily News>>

RSS Feeds
.........................................................
Appliance Industry
Market Research

...........................................................

November 2014: Appliance Magazine Market Insight Annual Subscriptions
November 2014: U.S. Appliance Industry: Market Value, Life Expectancy & Replacement Picture 2014
October 2014: Portrait of the European Appliance Industry
September 2014: Appliance Industry Focus: HVAC




 
Contact Us | About Us | Subscriptions | Advertising | Home
UBM Canon © 2014  

Please visit these other UBM Canon sites

UBM Canon Corporate | Design News | Test & Measurement World | Packaging Digest | EDN | Qmed | Plastics Today | Powder Bulk Solids | Canon Trade Shows