Home
Global Supplier Directory
APPLIANCE Engineer
Supplier Solutions
APPLIANCE Line
Whitepaper Library
Calendar of Events
Association Locator
Contents Pages
Market Research
Subscription Center


 
   
issue: July 2003 APPLIANCE Magazine

Motor Technology
Lamination Die Technology


 Printable format
 Email this Article
 Search

Varilok is a proprietary lamination die technology that is said to change the rules by which laminated stacks can be designed.

Laminated stacks are in use everywhere in electromagnetic products. According to LH Industries Corp., a Fort Wayne, IN, U.S. maker of die and stamping technologies, whether the laminations are produced "loose" or in an interlocked, die-assembled state, the cores have always been the product of the planar configuration (2D geometry) of the individual lamination and the height of the stack (altitude). Other than changes in height, no other variation was permitted along the Z axis. Varilok, a new technology from LH Industries, is said to change all that by allowing multiple lamination shapes in a stack, programmably sequenced, to generate very complex 3D shapes.

"The main attribute of Varilok is that it grants the product designer heretofore impossible control of laminated stack geometry in the Z axis. That may sound simple, but that allows limitless enhanced part features," explains Tom Neuenschwander, vice president of Technology. "Perhaps the need is to fit more power into a confined space. Maybe integral stator core mounting features would help accomplish that. The appliance engineer can design the electromagnetic core to conform more closely to the allowable space, available mounting surfaces, and for better control of secondary processes such as winding."

Varilok permits the stamping, collating, and interlocking of laminations of multiple outside perimeters into assembled stacks inside the die. The technology is said to be perfectly suited to the high-volume production of coil-on-plug ignition cores, specifically the cylindrically shaped laminated parts often referred to as "pencil cores." However, notes Mr. Neuenschwander, Varilok's ability to produce previously impossible 3D geometric shapes, with laminations stamped and assembled in the die, extends to an infinite variety of parts.

"Varilok is applicable to electric motor design, so it is, by extension, applicable to any appliance incorporating a motor drive for any purpose," says Mr. Neuenschwander. "The technology, however, will also apply to any appliance utilizing other types of electromagnetic devices as well. These might include electrically driven linear or rotary actuation, solenoids, generators, and transformers."

According to Mr. Neuenschwander, all the possible variations are derived from the primary Varilok principle—the capability of stamping laminations of varying outside configurations and interlocking them together in the die. The variety of lamination shapes is created by a series of selectively actuable punches. The number of punches, and thus the number of different laminations permitted in the stack, is limited only by the linear space available (in the feed direction) in the press and die. Placing the contouring punches/die openings in a transversely moving sub-die(s) can mitigate even that limitation. Precisely positioned by servomotor-driven lead screws, the sub-die stamps each lamination's contour in the desired sequence.

As the strip advances through the progressive die, the contour of each individual lamination is selectively trimmed to shape, and the entire operation is sequenced so that each lamination arrives at the assembly, or choke station, in the desired order. The choke station is designed to precisely locate each subsequent lamination in relation to the previous lam of the stack-in-process. All the while the choke is holding that stack and a number of previously completed stacks in an interference fit, thus providing resistance against the incoming lamination—resistance that is necessary to facilitate the interlocking operation.

 

Daily News

...........................................................

Nov 26, 2014: Hamilton Beach 3Q income down slightly

Nov 26, 2014: LG's sales of Inverter Linear Compressor refrigerators top 10 million

Nov 25, 2014: Robotics Exhibits Grow 25% at 2015 CES

Nov 25, 2014: Index shows HVAC/R contractors more positive than last year

Nov 25, 2014: Consumer Confidence Index Declines

More Daily News>>

RSS Feeds
.........................................................
Appliance Industry
Market Research

...........................................................

November 2014: U.S. Appliance Industry: Market Value, Life Expectancy & Replacement Picture 2014
October 2014: Portrait of the European Appliance Industry
September 2014: Appliance Industry Focus: HVAC
June 2014: Appliance Magazine Market Insight: April 2014




 
Contact Us | About Us | Subscriptions | Advertising | Home
UBM Canon © 2014  

Please visit these other UBM Canon sites

UBM Canon Corporate | Design News | Test & Measurement World | Packaging Digest | EDN | Qmed | Plastics Today | Powder Bulk Solids | Canon Trade Shows