|
|
|
|
issue: August 2006 APPLIANCE Magazine
Exhibition
Powder Coating 2006 |
 Printable format
 Email this Article
 Search
 |
|
Powder Coating 2006 is scheduled for September 18-21, 2006, at the Indiana Convention Center in downtown Indianapolis, Indiana, U.S. Here you will find the Powder Coating 2006 Schedule of Events and list of attendees. |
The Powder Coating Institute celebrates its 25th Anniversary this year and continues its trade show tradition with Powder Coating 2006. The event opens with the conference program, which starts on Monday afternoon, Sept. 18, and will run through Thursday afternoon, Sept. 21. The exhibition will be open beginning on Tuesday morning, Sept. 19 and conclude on Thursday afternoon along with the conference.
Attendees get a bonus this year, with the Electrical Manufacturing Expo held in the Indiana Convention Center alongside Powder Coating 2006. Sponsored by Electrical Manufacturing & Coil Winding Association, this is the international event for the design and manufacture of wound electrical components and finished electrical parts.
Below is the Schedule of Events and Exhibitors list for Powder Coating 2006.
Schedule of Events
Monday, September 18, Afternoon
Conference Sessions
2:00 – 5:00 PM
A. Introduction to Powder Coating:
Follow the Yellow Brick Road
B. Custom Coaters Roundtable
Tuesday, September 19, Morning
Conference Sessions
9:00 AM – Noon
C. Powder Coating Aluminum Extrusions
D. Pretreatment
E. Achieving Maximum Energy Savings
F. Outsourcing Vs. In-House
10:00 AM – 6:00 PM—Exhibition Open
Noon – 1:00 PM,—Conference Luncheon
Tuesday, September 19, Afternoon
No Conference Sessions
1:00 – 4:00 PM—Exhibitor Presentation Stage On Show Floor
5:45 PM—Prize Giveaways
Wednesday, September 20, Morning
5K Run/Walk for Fun Sponsored By Nalco
7:00 AM
Conference Sessions
Three tracks of technical presentations, each 25 minutes long
Track I
9:00 – 9:25 AM: Adding E-Coat to an Existing Powder Line: Speaker: Joseph J. Subda, DuPont Performance Coatings
9:30 – 9:55 AM: Paint Area Preventive Maintenance Plan for Continuous Improvement
Speaker: Walt Wick, HON Company
9:30 – 9:55 AM: Powder Environmental Room Design Requirements; Speaker: Kevin Coursin, KMI Systems, Inc.
10:30 – 10:55 AM: Why Powder is the Finish of Choice in Wire Fabrication; Speakers: Trena Benson DuPont Powder Coatings and a wire fabricator speaker
11:00 – 11:25 AM: Development of an Active Antibacterial Powder Coating; Speaker: Andrew Cockcroft/Dave Heflin, Akzo Nobel - Interpon Powder Coatings
Track II
9:00 – 9:25 AM: Job - Shop Powder Coating -
How to Sell Value, Minimize Risk and Improve Profits by Offering Quality Options; Speaker: Michael Cravens, IKON Powder Coating, Inc.
9:30 – 9:55 AM: Switching to Powder: From Small to Large Parts; Speaker: Dick Meade, EBAA Iron, Inc.
10:00 – 10:25 AM: Ceramic Oven Panels for Unique Energy Efficiency; Speaker: Alexander Azoulay, NEWPAC
10:30 – 10:55 AM: Influence of Rack Cleanliness on Transfer Efficiency & Coating Uniformity; Speaker: Jim Malloy, Kolene Corporation and John M. Cole, Cole Engineering LLC
11:00 – 11:25 AM: High Temperature Resistant Powder Coatings; Speaker: To Be Determined, Rohm and Haas Powder Coatings
Track III
9:00 – 9:25 AM: Gun Movement Technology Which One Is Right for You?; Speaker: Joe Glassco, Wagner Systems Inc.
9:30 – 9:55 AM: Using Automated Controllers to Streamline Paint Finishing Operations; Speakers: Rick Aquino, ABMyr, & Mike Reznicek, Tennant
10:00 – 10:25 AM: Plastic Media and the Benefits it has on the Powder Coating Industry; Speaker: Mikael Szymarek, Maxi - Blast, Inc.
10:30 – 10:55 AM: Take the Mystery Out of Powder Cure; Speaker; Mark Walker, Sherwin Williams
11:00 – 11:25 AM: Changing the Surface of Aluminum Finishing; Speaker: Craig Burkart and Ji Cui, Nalco Co.
10:00 AM – 6:00 PM —Exhibition Open
Noon – 1:00 PM—Conference Luncheon
Wednesday, September 20, Afternoon
Conference Sessions
1:00 – 3:00 PM
G. Small to Mid Powder Coating Systems
H. Advanced Powder Coating – Harry Powder
I. Economics of Powder Coatings
5:45 PM—Prize Giveaways
Thursday September 21, Morning
Conference Sessions
9:00 – 11:30 AM
J. Fast Color Change
K. Heat-Sensitive Substrates
L. Third Party Liquid-to-Powder Conversion
M. Curing
10:00 AM – 2:00 PM—Exhibition Open
1:45 PM—Grand Prize Giveaways
2:00 – 6:00 PM—Plant Tour, Astral Industries
Powder Coating 2006 Exhibitors
|
|
|
|
